We can imprint your artwork on any of these four Frisbee® models:
UMAX Model (82 Mold)
Jr. Ultimate (100 Mold)
Metal Die Charge (Per Color):
Setup Charge (One Color):
Each Additional Color:
100 - 199
200 - 499
500 - 999
1000 - 2499
2500 - 4999
5000 - 9999
Please Call or E-Mail Us for Special Pricing
Extra Stamp Color Per Disc:
Approx. 30% Recycled Material:
Glow In The Dark Material
U.V. Sensitive Material
General Order Information
MINIMUM ORDER: 100 units per model (Mini model is 200 units)
TERMS: Payment in advanced
PRODUCTION TIME: 3-4 weeks plus shipping
Production time begins after artwork approval and receipt of order and payment information. Expedited orders may be accommodated depending on our production schedule.
Our selection of disc and imprint colors can be seen below. Colors are subject to availability. Disc colors must be ordered at a minimum of 50 discs per color. An example is shown below:
50 white discs with a blue imprint
50 black discs with a silver imprint
50 yellow discs with a metallic red imprint
50 red discs with a white imprint
Please email your order & artwork to firstname.lastname@example.org. You can view our artwork requirements below for an understanding of proper format and design. For additional questions or inquires, please call us at (714) 522-2202.
THE HOT-STAMPING PROCESS: Discs are imprinted using a hot-stamping process. Your artwork is first etched into a metal die. The die is flipped upside down and inserted into a hot stamp machine which heats up the die. A piece of foil is placed between the metal die and the disc. The die stamps the disc melting the foil onto the surface of the disc in the shape of your design. The hot-stamping process is the most permanent and durable way to imprint a Frisbee®, and can be done with precision, resulting in detailed artwork that lasts.
ACCEPTABLE ARTWORK FORMATS: We use vector graphic files for hot-stamping because they offer the cleanest, crispest version of the artwork for the this process. It's important to remember that what you see when you print the artwork is what the metal die will look like. We prefer vector Illustrator (.EPS CS5, .AI or .PDF) files; however, we are happy to review any artwork to see if it can work with our process.
MAXIMUM IMPRINT AREA:
MULTI-COLOR DESIGNS: We cannot process designs where colors blend or overlap; there must be separation between different colors in your artwork. Please leave a distance of at least 1/16 of an inch between different colors. The foils used to imprint the discs are designed to adhere to the plastic of the disc and not to other foils.
COVERAGE AREAS: Large solid areas do not hot-stamp well. When coverage areas are too large, air pockets are created, which produce drops (small areas where the foil does not adhere) within your design. Any lines thicker than half an inch, and any solid areas bigger than a nickel tend to cause problems.